 [All]
JBuilder 2007 Installation Instructions
Obsah: Installation instructions for JBuilder 2007
Introduction
This document contains the instructions for installing and registering your JBuilder 2007 product.
Please read these instructions entirely before installing JBuilder 2007.
To use the ProjectAssist functionality, check the Include ProjectAssist installers and configuration tools box on the
ProjectAssist dialog page during the JBuilder 2007 install. This option is only available when installing on the Windows XP and Windows 2003 through one of the
JBuilder 2007 Enterprise editions.
Check the JBuilder product site at http://www.codegear.com/products/jbuilder for any
additional JBuilder Installation
items that may have occurred subsequent to this document.
For more product information, refer to the JBuilder 2007 Help
online and the various links on the Welcome to CodeGear JBuilder 2007
menu item on the product Help menu. These resources describe the new
features of JBuilder 2007. You can also find other plug-in specific help through
the Eclipse Online Help links.
System Requirements
The system requirements for each of the CodeGear JBuilder editions are listed
below:
PC:
- 1 GB RAM recommended minimum
- 1.5 GB RAM recommended
- 700 MB to 1.2 GB hard disk space minimum (depending on the JBuilder
2007 edition), plus additional space during installation
- Intel® Pentium® 4/2.4 MHz or higher (or compatible)
- DVD-ROM drive
- High-resolution monitor (1024x768 or higher, 256 colors)
- Mouse or other pointing device
Windows® Operating System (ProjectAssist Server Installation):
- Microsoft® Windows® XP Professional (SP2)
- Microsoft® Windows® 2003 Server
Windows® Operating System (IDE or Assimilated TeamInsight Components):
- Microsoft® Windows® Vista 32-bit
- Microsoft® Windows® XP Professional (SP2)
- Microsoft® Windows® 2003 Server
Red Hat Enterprise Linux (IDE or Assimilated TeamInsight
Components)
- P4 2.4 GHz processor, or greater
- 1 GB RAM recommended
- Red Hat Linux 4.0
Macintosh® (IDE or Assimilated TeamInsight Components)
- Intel Processor
- 1 GB RAM recommended
- OS X Tiger
PC:
- 512 MB RAM minimum
- 768 MB RAM recommended
- 700 MB to 1.2 GB hard disk space minimum (depending on the JBuilder
2007 edition), plus additional space during installation
- Intel® Pentium®4/2.4 MHz or higher (or compatible)
- DVD-ROM drive
- High-resolution monitor (1024x768 or higher, 256 colors)
- Mouse or other pointing device
Windows® Operating System:
- Microsoft® Windows® XP Professional (SP2)
- Microsoft® Windows® Vista 32-bit
- Microsoft® Windows® 2003 Server
Red Hat Enterprise Linux(IDE or Assimilated TeamInsight
Components)
- P4 2.4 GHz processor, or greater
- 1 GB RAM recommended
- Red Hat Linux 4.0
Macintosh® (IDE or Assimilated TeamInsight Components)
- Intel Processor
- 1 GB RAM recommended
- OS X Tiger
[ top of page ]
Installing JBuilder 2007
Troubleshooting Your JBuilder 2007 Installation
General
If the installation can be performed successfully on another machine (with
the same OS platform), the resulting installation directory can be copied
from one machine to another. This can be the easiest way to workaround installation
problems, but is only useful when other machines on a network are available.
Nothing happens after the installation program is started
If the main installation program does not automatically launch when the
DVD is inserted into the DVD drive:
- Navigate to the DVD drive.
- Navigate to the
Disk1\InstData\VM\ directory.
- Double-click on the installation executable (
jbinstall.exe
on Windows, install_mac_osx.sh on the Macintosh, or install_linux.sh for
Red Hat Enterprise Linux 4.0 ).
Error -1 when starting the installation program from a DVD
This error occurs when the DVD driver is having trouble reading from the
DVD. In this case, try copying the contents of the DVD into a temporary
directory on your hard drive and then launch the installer from that location.
If the files cannot be copied from the DVD to the hard drive because of
read errors (for example, error -1, read errors, etc.), check the DVD for
scratches. If the DVD is visibly damaged, please call disk replacement to
be issued new media by calling 831-461-9190.
If the contents of the DVD still cannot be copied to the hard drive, an
alternative is to simply download and install the appropriate trial version
of JBuilder. The trial product will be converted to a full product by using
your serial number during registration. Make sure that you choose the download
that matches the license (that is, a serial number for Developer will NOT
activate the Enterprise Trial). The Trial downloads may be accessed from
the following location:
http://www.codegear.com/downloads
In this case, make sure to download and install any supplementary files
on the same page as the main download (e.g documentation, samples, extras).
The main installation program does not launch when the DVD is inserted
To eliminate possible conflicts with other third-party software, disable
anti-virus software (e.g. stop the service), exit out of any other currently
running software, and then retest the installation.
In Windows XP, you can automatically do this using the msconfig.exe
tool to restart your system in a diagnostic mode that prevents third-party
services from starting up. To do this:
- Choose Start|Run.
- Enter
msconfig and click OK.
- Under the General tab, select Diagnostic Startup and click OK.
- Restart your system and start the JBuilder 2007 installation program
again.
After successfully installing JBuilder, repeat these steps, changing Diagnostic
Startup to your usual Startup mode.
The installation programs seems to start, but then freezes at the splash
screen
To troubleshoot installation graphics driver issues, try the following:
- First, visit the website of the manufacturer of the graphics card to
download and install the latest driver.
- Windows XP: If the issue is not resolved, try turning down the graphics
card acceleration. To do this:
- Right-click on the desktop.
- Choose Properties|Settings|Advanced|Troubleshoot.
- Set the Hardware acceleration to None.
- Start the JBuilder installation program again.
- The installation progress bar may stay near the end for a very long
time, making it seem like the installation program has hung. Do not end
the program; the installation will complete successfully after a period
of time.
[ top of page ]
Registering JBuilder 2007
When you run JBuilder 2007 for the first time, you will need the serial number
and key provided with your copy of the product. You can use JBuilder 2007
for 14 days after installation without registering. After 14 days, JBuilder
2007 will not run until it has been registered.
(Note: There is no grace period for upgrade and trial versions,
or for Optimizeit® products. These products must be registered before they
can be used.)
Trial users: See the front label of your product DVD for
the URL or visit http://www.codegear.com/downloads/free/jbuilder
to obtain your trial activation files.
- Start JBuilder 2007.
- When the Registration Wizard appears, select one of the following options,
then click Next:
[ top of page ]
Registering with a Serial Number
If you have the serial number and key from your JBuilder 2007 installation
flyer:
- Enter your serial number and key, then click Next.
- Review and accept the licensing terms, then click Next.
- Select one of the following options:
- Direct
Select this option if you have an Internet connection and want to
complete the registration process quickly.
- Email
Select this option if you have an email account and want to receive
your activation file via email.
- Web page
Select this option if you want to complete the registration process
using a web page and receive your activation file via email.
- Telephone
Select this option if you want to complete the registration process
by telephone and receive your activation file by email or postal mail.
- Click Next.
Completing direct registration
If you are using direct registration:
- Enter your CodeGear customer account information.
- If you use a proxy to connect to the Internet, then enter your proxy
settings when the Proxy Settings dialog appears. Otherwise, click Next.
(If you don't know whether you use a proxy or your proxy settings, check
with your System Administrator.)
- When the Information Summary dialog appears, verify that the information
to be registered is correct. If the information is correct, click Next.
Otherwise, click Back and correct the information before proceeding.
- Your registration information will now be transmitted and processed.
When the message "Registration completed successfully!" is highlighted,
click Next.
- Click Finish. The registration process is completed.
Completing registration by email
If you are completing your product registration by email:
- Enter your CodeGear customer account information.
- When the Information Summary dialog appears, verify that the information
to be registered is correct. If the information is correct, click Next.
Otherwise, click Back and correct the information before proceeding.
- When the Email Registration dialog appears, click Clipboard Copy to
copy the information provided to your system clipboard. You will need
to paste this into the body of an email message.
- Send an email to Email registration
and paste the information from your system clipboard into the body of
the message.
- Click Next.
- Click Finish.
- When you receive the email containing your activation file, you will
need to repeat the registration process, this time choosing the Have
Activation File option.
Completing registration using the web
If you are completing your product registration using the web page:
- Click Next.
- Record the Registration Key provided. You will need this to complete
your registration.
- Click Finish.
- Using your web browser, go to Web
Registration to complete the registration process.
- Click Finish.
- When you receive the email containing your activation file, you will
need to repeat the registration process, this time choosing the Have
Activation File option.
Completing registration by telephone
If you are completing your product registration by telephone:
- Enter your CodeGear customer account information.
- Select your location from the Telephone Number list.
- Call the Customer Service number for your location.
- Keep the Phone Registration displayed. You will need the information
it contains to complete the registration process.
- Click Finish.
- When you receive your activation file, you will need to repeat the
registration process, this time choosing the Have
Activation File option.
Using or creating a CodeGear Developer Network
or Software Registration account
Select one of the following options:
- I have an account
Select this option if you have a CodeGear Developer Network or Software
Registration account from a previous CodeGear product registration.
- Click Next.
- Enter either your CodeGear Developer Network Member or Software
Registration Account login name or your e-mail address.
- Enter your CodeGear Developer Network Member or Software Registration
Account password.
- Click Next.
- I don't have an account
Select this option if you do not have a CodeGear Developer Network or
Software Registration account from a previous CodeGear product registration.
- Click Next.
- When the User Information dialog appears, enter the following
information:
- Your First Name
- Your Last or Family Name
- The name of your company or organization (optional)
- You can click Privacy Policy to view the privacy statement.
- Click Next.
- When the New Account Information dialog appears, enter the following
information:
- A login name for your Software Registration Account.
- Your e-mail address.
- A password for your Software Registration Account. (Note:
The password must be at least 4 characters in length and must
not contain any spaces.)
- Verify the password for your Software Registration Account
by entering it again.
- You can click Privacy Policy to view the CodeGear privacy
statement.
- Click Next.
- When the Additional Information dialog appear, complete the required
fields:
- Country
- State/Province (if your selected Country was United States
or Canada)
- Zip Code
- Click Next.
- When Contact Preferences dialog appears, select your preferred
contact methods.
- Click Next.
[ top of page ]
Registering with an Activation File
To register using an activation file:
- Enter the path and filename of your activation file, or click the ellipsis
(...) button to browse to the location of the file.
- Click Next.
- Click Finish. The registration process is completed.
[ top of page ]
Checking out a concurrent license
When you're using a concurrent license for your CodeGear product, you might
have occasions where you want to work offline, rather than connected to
the License Server. The License Manager provides Check Out and Check In
features that allow you to work offline. When you check out a license, you
need to specify the duration of the check out. Once you've completed your
offline work, you can check in the license to return it to the license pool.
The client product has to be able to reach the License Server in order to
check in the license.
Concurrent licenses are listed on the server in a userlist-concurrent.txt
file. The maximum checkout time is set by the server administrator for each
user.
Follow these simple steps to check out a license:
- Choose Tools|License Manager to open the License Manager.
- Right-click the Concurrent Network License node in the tree on the left
and choose Check Out License.
- Enter the duration time in hours in the License Duration (hours) field.
You can't exceed the maximum checkout time set by your server administrator.
See your administrator for the maximum setting.
- Click OK to close the Checkout License dialog box. A Checkout Successful
message displays. Click OK to close it. A red check mark displays next
to the Concurrent Network License node to indicate that you're disconnected
from the License Server and can use the product offline.
Important: Notice that the remaining checkout time is
displayed next to the Concurrent Network License node in parenthesis.
For example, Concurrent Network License (1 hour left). To refresh the
checkout time, right-click the Concurrent Network License node and choose
Refresh Time Left.
Checking in a concurrent license
Once you've completed your offline work, you need to check the license
in to return it to the license pool.
Follow these simple steps to check in a license:
- Choose Tools|License Manager to open the License Manager.
- Right-click the Concurrent Network License node in the tree on the left
and choose Check In License.
- Click Yes in the Confirm License Checkin dialog box to check the license
in.
[ top of page ]
JBuilder 2007 Partner DVD
Uninstalling JBuilder 2007
Windows
To uninstall JBuilder 2007 on Windows, do one of the following:
- Run the following from the directory where you installed JBuilder 2007:
UninstallerDataEnt\Uninstaller.exe.
- Choose Start | All Programs | JBuilder 2007 | Uninstall JBuilder 2007
Enterprise.
- Choose Settings | Control Panel | Add/Remove programs and select
JBuilder
2007 from the list.
Red Hat Enterprise Linux 4.0
Run the following from the directory where you installed JBuilder 2007:
user-install-dir/UninstallerDataEnt/Uninstaller.
Macintosh
Run the following from the directory where you installed JBuilder 2007:
user-install-dir/UninstallerDataEnt/Uninstaller.
Known problems
Uninstalling JBuilder might leave some files on your system that will need
to be manually removed.
[ top of page ]
|
